Semi-Automatic



Automatic

• No changeover parts are necessary for standard caps and containers. Knob adjustments regulate the fast changeover of vitually any size and shape cap including: tamper evident caps, child safety caps, overcaps and dispenser caps.
  
• Standard stainless steel components include: stainless steel upper and lower cap chutes, stainless steel cap supply hopper, stainless steel rotary feeder, stainless steel guarding throughout, stainless steel rotary feeder, stainless steel conveyor frame, stainless steel shafting, stainless steel screws, stainless steel gripper housings, etc.

  Above: Model FC-8 Capper Cap Tightener/Retorquer

  
  
• Handles vials to 2 1/2 gallon containers, made of plastic, glass or metal without changeoverparts for standard containers. (5 gallons on special request.)
  
• No bottle - no cap safety release.
  
• All cappers come standard with the exclusive FEED SYSTEMS® patented stainless steel rotary cap feeder offering quiet and gentle cap orientation with no changeover parts for all standard caps.
  
• All models are available with two sets of bottle gripper belts for tall or unstable containers providing complete bottle control, consistent torque and eliminating product spillage and cross-threading.
  
• Fully adjustable bottle gripper assemblies are available to accommodate various bottle contours including tapered containers and containers with offset necks.
  
• All models can be fitted with several types of cap feeders such as the standard FEED SYSTEMS rotary cap feeder, optional patented escalator cap feeder or a vibratory cap feeder to accommodate your production requirements.
  
• Floor level Bulk Cap Elevators and Mini-"L" cap elevators are available for all models to accommodate higher speed requirements and restricted ceiling heights. This allows filling the hopper from floor level.
  
• The exclusive "DIAL-A-TORQUE®"patented clutch system is standard equipment on all models. This heavy-duty clutch system provides a consistent torque for 8mm to 120mm diameter caps of all types and is completely adjustable. (Available as a remotely controlled pneumatic system.)
  
• Exclusive KAPS-ALL Electronic Torque Monitoring System is available for all models, providing a high level of quality assurance. Computer interface (RS-232) is standard for all auxiliary functions and data printouts. Bottle reject systems for low torque also available.
  
• All models are capable of being used as a cap tightener for all types of spray pumps, short runs and re-torqueing after heat induction foil sealing.
  
• All front and rear changeover adjustments more together on center with calibrated knob settings. No need to adjust machine from behind. Positive centering of your caps and containers eliminate cross threaded caps, misalignments and undue wear of cap tightening discs.

Semi-Automatic Automatic